RTD14 is a resistance temperature detector with a fixed hex fitting. Immersion RTDs are ideal for applications where the metallic probe tip is inserted directly into drilled holes (such as machine components) or the process, especially when dealing with non-aggressive media or low-abrasion environments.

Key Features:-

• Available in types: Pt100, Pt100 (0.00392), Pt200, Ni20 ohm.
• Available in Class B, Class A, Class AA, 1/10 DIN B (IEC 60751 & ASTM E1137).
• Single and Duplex sensor elements.
• Temperature range: -196°C to 600°C (-320°F to +1,112°F).
• A wide selection of sheath materials to suit application requirements: 316 SS, Inconel 600. (See Data Sheet for more information).
• Sheath diameter available from 1/8″ to 0.375″ (3.2mm to 10.00mm).
• Mineral-insulated design for high-temperature applications and tube-and-wire design for low-temperature applications.
• High vibration resistance and ultra-temperature options available.
• Single-ended & double hex fitting in both NPT and BSP threads.
• Insulation resistance: 100 MΩ @ 250 VDC.
• Response time: < 5 sec in circulating water @ 1 ft/sec.
• Accuracy: As per IEC 60751 (see tolerance chart).
• Self-heating error: < 0.30°F (0.17°C).
• Time constant: < 5 sec.

The RTD13 series sensors are designed as quick, temporary replacements for malfunctioning RTD sensors, making them ideal for applications where minimizing downtime is crucial. These sensors offer a cost-effective solution, as they are available in predetermined lengths that can be cut to fit specific needs, reducing the need to stock various RTD lengths. Primarily intended as a quick fix for failed sensors within thermowell assemblies, the cut-to-length RTDs are recommended for short-term use until a permanent replacement can be installed. This provides a practical, flexible option for maintaining operations with minimal disruption.

Key Features:-

• Available in type Pt100,Pt100(0.00392),Pt200,Ni20 ohm
• Available in Class B, Class A, Class AA, 1/10 DIN B(IEC 60751& ASTM E1137)
• Temperature Range -196 to 485°C ( -58 °F to +905 °F)
• A wide selection of sheath materials to suit application requirements 316 SS, Inconel 600.( See Data Sheet for more Information)
• Sheath diameter is available from 1/8″ to 0.375″(3.2mm to10.00mm).
• Adjustable compression fitting and spring loaded holder available.
• High Vibration resistance and ultra-temperature option available
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 5 sec

HHRTD- 1 : Hand Held RTD with stainless steel handle specifically designed for measuring the temperature inside meat or similar food products. It uses an RTD (Resistance Temperature Detector) element, which is highly accurate and stable, to provide precise temperature readings. These probes are commonly used in food processing, cooking, or quality control environments where it is essential to monitor the internal temperature of meat for safety and quality reasons.

Key Features:-

• Sharp tip for easy Penetration into the meat or other similar foods.
• FDA Approved 316 SS material to use in direct contact with food.
• Available in type Pt100, Pt1000, Ni20 ohm .
• Available in Class B, Class A, Class AA, (IEC 60751& ASTM E1137)
• Single and Duplex Sensor elements.
• Range -50°C to 260°C ( -58°F to +500 °F)
• Insulation Resistance : 1000 MG Ohms @ 500 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 5 sec

EMB-RTD ; Embedment style resistance temperature detector specifically designed for bearing temperature or other rotating shafts temperature. Probe tip is inserted directly into drilled holes (such as bearing housing,machine components) or the process. With small button type design these rtds can be installed at norrow and small spaces. TempoTech Embedment RTDs comes in three tip styles A, B, C and D to use in all types of application. Typically embedment rtds are installed close to the Babbitt layer of the bearing shoe for accurate bearing temperature measurement.

Key Features:

•  Available in type Pt100,Pt100(0.00392),Pt200,Ni20 ohm .
• Type Style A, B, C and D.
•  Available in Class B, Class A, Class AA, (IEC 60751& ASTM E1137)
• Single and Duplex Sensor elements.
• Range -50°C to 260°C ( -58°F to +500 °F)
• Sheath diameter is available 0.275,0.250,0.125 and 0.080 Inch.
• High Vibration resistance design.
• Available with Hazardous Approvals Class 1, Div. 2.
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 3 sec

BRTD Tip Sensitive Copper Tip Bearing RTD with Electrically Isolated Tip is a resistance temperature detector specifically designed for bearing temperature or other rotating shaft temperatures. The copper tip probe is inserted directly into drilled holes (such as bearing housing, machine components) or the process. The copper tip design allows small changes in temperature to be detected quickly, helping to avoid major damage to the bearing or shaft. TempoTech bearing RTD comes with an electrically isolated tip, making it suitable for use in high-voltage motors and electrically heated bearings. The electrically isolated tip helps to prevent any signal interference caused by electric currents.

Key Features:

• Available in types: Pt100, Pt100 (0.00392), Pt200, Ni20 ohm.
• Electrically isolated tip for electrically heated bearings.
• 20 times faster response than standard stainless steel tips.
• Available in Class B, Class A, Class AA (IEC 60751 & ASTM E1137).
• Single and Duplex sensor elements.
• Temperature range: -50°C to 260°C (-58°F to +500°F).
• Cut-to-length style for easy installation on-site.
• Sheath diameter available: 0.188", 0.215", and 0.250".
• Insulation Resistance: 1000 MΩ @ 500 VDC.
• Dielectric Strength: 1000 VAC at 60 Hz with 1 mA maximum leakage current.
• Response time: < 5 sec in circulating water @ 1 ft/sec.
• Accuracy: As per IEC 60751 (see tolerance chart).
• Self-heating error: < 0.30°F (0.17°C).
• Time constant: < 3 sec.