SSRTD- Silicon patch surface RTDs are specifically designed to measure the winding temperature in electric motors , generators and other applications. Silicone patch RTDs are installed on uneven surface for temperature measurement , these RTDs offer flexibility to measure temperature accurately on uneven surfaces.

Key Features:-

• Flexible Silicon Patch to install on round or uneven surface.
• Available in pt100, pt1000, and Ni120 ohm.
• Custom Size patch to cover entire surface temperature.
• Available with Silicon Adhesive back.
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <3 Sec in circulating water @ 3ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Alpha Curve : IEC 0.00385
• Time Constant : < 3 sec
• Patch Thickness : 0.060"

RTD 71 is a highly accurate industrial temperature sensor with an adjustable connection designed for flexible installation in various industrial processes. It typically features an adjustable fitting, such as a compression fitting or sliding gland, allowing for precise positioning within the application. This adaptability makes it ideal for environments where insertion depth, mounting location, or process conditions may vary.

Key Features:-

• Uses connection head to protect the electrical connections from environmental factors such as moisture, dust, and mechanical damage.
• Connection head usually made of aluminum, stainless steel or plastic and available in weatherproof, explosion-proof or corrosion-resistant designs.
• Connection head contains terminals or 4-20mA output temperature transmitter for signal conditioning.
• Available with Pt100 or Pt1000 elements per IEC 60751 standard in Class A or Class B accuracy ratings.
• Available in 2-wire, 3-wire, or 4-wire configurations for enhanced accuracy and reduced lead wire resistance errors.
• Available in 304, 316, or 316L stainless steel for corrosion resistance and sheath diameters range from 3mm to 12mm (custom sizes available).
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 5 sec

RTD44- Flexible Spring Bayonet Style RTD (Resistance Temperature Detector) consist of a long flexible SS spring along with bayonet cap locking mechanism mounted on wire. This arrangement allows for spring loading of temperature measuring tip and facilitates firm contact of tip with the surface to achieve fast response and accurate temperature readings. This construction is designed to withstand vibration, movement and challenging mounting conditions, this RTD delivers consistent performance in harsh applications.

Key Features:-

• Spring-Loaded Tip – Ensures consistent contact with the measuring surface for improved accuracy and faster response times.
• Accommodates variations in installation depth by applying constant pressure.
• Most suited for installations requiring movement or frequent adjustments.
• Typically operating ranging is from -50°C to 500°C, depending on insulation and sheath material.
• Available in 2-wire, 3-wire, or 4-wire configurations for enhanced accuracy and reduced lead wire resistance errors.
• Available in Insulations like Teflon (PTFE), Fiberglass, or PVC based on environmental requirements.
• Typically uses Pt100 or Pt1000 elements with Class A or B accuracy (per IEC 60751)
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 5 sec

RTD 43 Flexible Spring Bayonet Style RTD (Resistance Temperature Detector) consist of a long flexible SS spring along with bayonet cap locking mechanism mounted on wire. This arrangement allows for spring loading of temperature measuring tip and facilitates firm contact of tip with the surface to achieve fast response and accurate temperature readings. This construction is designed to withstand vibration, movement and challenging mounting conditions, this RTD delivers consistent performance in harsh applications.

Key Features:-

• Spring-Loaded Tip – Ensures consistent contact with the measuring surface for improved accuracy and faster response times.
• Accommodates variations in installation depth by applying constant pressure.
• Most suited for installations requiring movement or frequent adjustments.
• Typically operating ranging is from -50°C to 500°C, depending on insulation and sheath material.
• Available in 2-wire, 3-wire, or 4-wire configurations for enhanced accuracy and reduced lead wire resistance errors.
• Available in Insulations like Teflon (PTFE), Fiberglass, or PVC based on environmental requirements.
• Typically uses Pt100 or Pt1000 elements with Class A or B accuracy (per IEC 60751).
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 5 sec

A Weld Pad RTD32 is a type of surface resistance temperature detector designed specifically for measuring temperatures on metal surfaces. It ensures precise thermal contact and accurate temperature readings by featuring a flat, flexible sensing tip that can be directly welded or brazed onto a metallic surface. This type of thermocouple is widely used in applications requiring permanent or semi-permanent temperature monitoring of pipes, vessels, and equipment in harsh industrial environments.

Key featrues:-

• Available in type Pt100,Pt100(0.00392),Pt200,Ni20 ohm .
• Available in Class B, Class A, Class AA, 1/10 DIN B(IEC 60751& ASTM E1137)
• Single and Duplex Sensor elements.
• Range -196°C to 600°C ( -320°F to 1,112 °F)
• Standard Weld Pad size 1"x1"x1/8", Custom option available
• Bare ends and Connector option avaible
• TEFLON (200°C)fiberglass wire 480°C with SS braiding and Armours available
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 5 sec

The RTD31 Magnet RTD is a specialized type of RTD sensor designed to measure surface temperatures by attaching magnetically to ferromagnetic materials. It combines the functionality of a standard RTD with the convenience of a magnetic mount, making it ideal for applications where non-invasive, temporary temperature monitoring.

Key features:-

• Available in type Pt100,Pt100(0.00392),Pt200,Ni20 ohm .
• Available in Class B, Class A, Class AA, 1/10 DIN B(IEC 60751& ASTM E1137)
• Single and Duplex Sensor elements.
• Range -50°C to 510°C ( -58°F to 950°F)
• Magnet Pull Strength 2.5,30 & 50 Pound, Custom option available
• Spring loaded Tip, Copper Tip Option available for Fast Response
• Bare ends and Connector option avaible
• TEFLON (200°C and fiberglass wire 480°C with SS braiding and Armours available
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 5 sec

The RTD22 series Nozzle Melt Resistance Temperature Detector with Lead Wire from Tempotech Controls, featuring a threaded nozzle design, is commonly used for measuring the temperature of an injection molding machine nozzle. This style does not come into direct contact with molten plastic. Due to its compact size, it is also suitable for use in other applications with limited space, such as mounting in bearing housings, sealing bars, and heat plates. Custom elements with different materials, values, and tolerances are available upon request for specific needs.

Key Features:-

• Available in types: Pt100, Pt100 (0.00392), Pt200, Ni20 ohm.
• Available in Class B, Class A, Class AA, 1/10 DIN B (IEC 60751 & ASTM E1137).
• Single and Duplex sensor elements.
• Temperature range: -50°C to 510°C (-58°F to 950°F).
• Standard bolt size: 3/8"-24, custom options available.
• Bare ends and connector options available.
• Teflon (200°C) and fiberglass wire (480°C) with SS braiding and armoring available.
• Insulation resistance: 100 MΩ @ 250 VDC.
• Response time: < 5 sec in circulating water @ 1 ft/sec.
• Accuracy: As per IEC60751 (see tolerance chart).
• Self-heating error: < 0.30°F (0.17°C).
• Time constant: < 5 sec.

RTD11  is resistance temperature detector are ideal for applications where the metallic probe tip is inserted directly into drilled holes (such as machine components) or the process, especially when dealing with non-aggressive media or low abrasion environments.

Key Features:-

• Available in type Pt100,Pt100(0.00392),Pt200,Ni20 ohm
• Available in Class B, Class A, Class AA, 1/10 DIN B(IEC 60751& ASTM E1137)
• Single and Duplex Sensor elements
• Temperature Range -196 to 850°C ( -320 °F  to +1562 °F)
• A wide selection of sheath materials to suit application requirements 316 SS, Inconel 600.( See Data Sheet for more Information)
• Sheath diameter is available from 1/8″ to 0.375″(3.2mm to10.00mm).
• Mineral Insulated desgin for High Temperatrue  and Tube and wire design for low-temperature application
• High Vibration resistance and ultra-temperature option available
• Insulation Resistance : 100 MG Ohms @ 250 vdc
• Response Time : <5 Sec in circulating water @ 1ft/sec
• Accuracy : As per IEC60751 (See tolerance chart)
• Self Heating Error: < 0.30°F (0.17°C)
• Time Constanat : < 5 sec