Filter
Sort:
Show:
TT-RHT Temperature and Humidity Transmitter

TT-RHT Temperature and Humidity Transmitter

Add to cart

Temperature and Humidity Transmitter With a wide backlit LCD and distinctive design, the RHT Climate is a relative humidity and temperature transmitter that provides highly accurate and stable measurements over a wide operating range. It calculates in real time seven psychrometric properties and all variables will be available in current or voltage retransmission or by RS485 Modbus RTU communication. Versatile, the device allows parameters configuration, temperature and relative humidity simulation and retransmission signal generation, useful features for fast and easy in the field commissioning through USB with NXperience or directly over the keyboard. The RHT Climate also has two digital alarm outputs and an embedded buzzer for sound alarm.

2–3 weeks lead time
HHRTD-2 Handheld Resistance Temperature Detector Probe with Plastic Handle

HHRTD-2 Handheld Resistance Temperature Detector Probe with Plastic Handle

Read more
HHRTD- 2 : Hand Held RTD with plastic handle designed for measuring the temperature in multiple applications. It uses an RTD (Resistance Temperature Detector) element, which is highly accurate and stable, to provide precise temperature readings. These probes are commonly used in food processing, cooking, or quality control , metal processing, hvac, steam temperature, for safety and quality reasons.
Key Features:-
  • Sharp tip option for easy Penetration into the meat or other similar foods.
  • FDA Approved 316 SS material to use in direct contact with food.
  • Available in type Pt100, Pt1000, Ohm
  • Available in Class B, Class A, Class AA, (IEC 60751& ASTM E1137)
  • Single and Duplex Sensor elements.
  • Range -50°C to 260°C ( -58°F to +500 °F)
  • Sheath diameter is available 0.188., 0.250, 5mm, 6 mm
  • Option with Heavy Duty tip for extended life.
  • Insulation Resistance : 1000 MG Ohms @ 500 vdc
  • Response Time : <5 Sec in circulating water @ 1ft/sec
  • Accuracy : As per IEC60751 (See tolerance chart)
  • Self Heating Error: < 0.30°F (0.17°C)
  • Time Constanat : < 5 sec
BRTD70- Tip Sensitive Copper Tip Bearing RTD with Connection Head

BRTD70- Tip Sensitive Copper Tip Bearing RTD with Connection Head

Read more
BRTD70- An Industrial RTD (Resistance Temperature Detector) without extension is a high-accuracy industrial temperature sensor designed for direct insertion into a process or surface without the use of thermowells. These RTDs are commonly used in industrial applications where precise temperature measurement is required in harsh or high-temperature environments.
Key Features:-
  • Uses connection head to protect the electrical connections from environmental factors such as moisture, dust, and mechanical damage.
  • Copper Tip for Fast resposne
  • Connection head usually made of aluminum, stainless steel or plastic and available in weatherproof, explosion-proof or corrosion-resistant designs.
  • Connection head contains terminals or 4-20mA output temperature transmitter for signal conditioning.
  • Available with Pt100 or Pt1000 elements per IEC 60751 standard in Class A or Class B accuracy ratings.
  • Available in 2-wire, 3-wire, or 4-wire configurations for enhanced accuracy and reduced lead wire resistance errors.
  • Available in 304, 316, or 316L stainless steel for corrosion resistance and sheath diameters range from 3mm to 12mm (custom sizes available).
  • Insulation Resistance : 100 MG Ohms @ 250 vdc
  • Response Time : <5 Sec in circulating water @ 1ft/sec
  • Accuracy : As per IEC60751 (See tolerance chart)
  • Self Heating Error: < 0.30°F (0.17°C)
  • Time Constanat : < 5 sec
TempotecH CSA ATEX
Temperatrue Gauge

Temperatrue Gauge

Read more
Universal Input Panel Meter
CAD $ 100.00

Universal Input Panel Meter

Add to cart
This high performance universal input panel meter features a bright 56 mm high display for high visibility at long distances. The N1500G setup can be done via its keyboard or via a remote PC since it features RS485 comm and a digital input with special functions.  
2–3 weeks lead time
LogBox LTE: Multichannel IoT Data Logger
CAD $ 100.00

LogBox LTE: Multichannel IoT Data Logger

Add to cart
The LogBox LTE is a multichannel IoT data logger designed for efficient and secure remote monitoring. Utilizing NB-IoT and Cat-M1 networks, it provides real-time data collection and transmission, ensuring high reliability and autonomy even in remote or hard-to-reach locations. This device is ideal for industrial processes requiring precision and operational continuity, establishing itself as an essential solution for monitoring critical variables.
 
2–3 weeks lead time
LogBox Wireless Multi Channel Data Logger
CAD $ 100.00

LogBox Wireless Multi Channel Data Logger

Add to cart

LogBox Wi-Fi is an IoT device with integrated data logger and Wi-Fi connectivity. It allows monitoring and recording of data remotely, in facilities with Wi-Fi infrastructure. The data can be accessed remotely, wirelessly and centralized through SCADA application, cloud dashboard or by NXperience software. Easy installation and accessibility are highlights of this device.The device has three universal analog inputs and one digital input, that can operate as counter of pulses (flow sensor) or recorder of events (opening/closing doors). LogBox Wi-Fi has MQTT protocol to publish data into IoT brokers, Cloud or SCADA system, as well as Modbus TCP protocol to operate as slave into SCADA systems.

2–3 weeks lead time
TT-467 Temperatrue Transmitter with Disaply and enclouser ( Non HazLoc)

TT-467 Temperatrue Transmitter with Disaply and enclouser ( Non HazLoc)

Read more

The TT-467 temperature transmitters are engineered for versatile use in the process industry, delivering exceptional accuracy with sensor-transmitter matching and robust protection against electromagnetic interference. Configurable via the HART® protocol, these transmitters can be easily set up . Features include open circuit and short circuit , Incorrect wiring, Internal device error, Over range and under range detections. These functions ensure high reliability and system security.

 
TT-367 Head Mounted Temperatrue Transmitter with Display HART

TT-367 Head Mounted Temperatrue Transmitter with Display HART

Read more

The TT-367 temperature transmitters are engineered for versatile use in the process industry, delivering exceptional accuracy with sensor-transmitter matching and robust protection against electromagnetic interference. Configurable via the HART® protocol, these transmitters can be easily set up . Features include open circuit and short circuit , Incorrect wiring, Internal device error, Over range and under range detections. These functions ensure high reliability and system security.

 
KNE-DIE CAST ALUMINUM HEAD
CAD $ 19.60

KNE-DIE CAST ALUMINUM HEAD

Add to cart
TempoTech’s Thermocouple connection heads are enclosures designed to house the thermocouple junction and provide a safe, protected environment for the connections to the temperature measurement system. These heads are typically used in industrial or scientific settings where temperature measurement needs to be done reliably and securely.
Key features:-
  • Protection: They protect the thermocouple from physical damage, environmental factors like moisture, dust, or chemicals, and prevent corrosion.
  • Wiring: They provide a space for wiring the thermocouple to the measuring equipment, often including terminals for easy connection and disconnection.
  • Ease of Maintenance: They allow for easier replacement or servicing of the thermocouple sensor without needing to disturb the rest of the setup.
  • Environmental Sealing: Many connection heads are sealed to prevent moisture or contaminants from affecting the thermocouple or wiring.
 
TEFLON-Insulated RTD wire non shielded -FEP (-200° C to + 205°C)

TEFLON-Insulated RTD wire non shielded -FEP (-200° C to + 205°C)

Read more
FEP: Color-coded FEP Teflon® is extruded over each single conductor. The single insulated conductors are twisted and insulated with an extruded white jacket of FEP Teflon®
Key Features
  • Rated for continuous use at 400° F (205º C).
  • Available in nickel plated, Silver plated and Tin plated conductors.
  • Available in Type 3 , 4 and 6 Conductors
  • Singles: PFA Teflon®‡ 8 mil nominal
  • Jacket: PFA Teflon®‡ 10 mil nominal
Comparison to Other Constructions:
Abrasion Resistance - Fair Chemical Resistance - Good Moisture Resistance - Good
20%
ITMR-01 Intgeral Temperatrue Transmitter sensor
Original price was: CAD $ 10.00.Current price is: CAD $ 8.00.

ITMR-01 Intgeral Temperatrue Transmitter sensor

Add to cart

The ITMR™ Microprocessor Integrated Sensor Transmitter is a temperature transmitter featuring an embedded electronic circuit and microprocessor. This innovative sensor can be recalibrated and re-scaled across its full operational range.The ITMR combines the precision and reliability of an RTD element with the advantages of an integrated 4-20mA signal-conditioning device.Its compact design makes the ITMR ideal for applications with limited space where a connection head cannot be used, such as in compressors, generators, chillers, engines, and various industrial settings.

Key features;-
  • Input: Pt100/Pt1000
  • Output: 4-20mA or 20mA to 4 mA 2 wire Loop Powered
  • Operating temerature: -40 to 85 °C
  • Power  Supply 8 to35 VDC
  • Accuracy: 0.1 % @25 °C
  • Range: -200 to 650 °C (-328 to 1112 °F)
  • Response time: 1.6 s
TT-267 Head Mounted Temperatrue Transmitter HART

TT-267 Head Mounted Temperatrue Transmitter HART

Read more

The TT-267 temperature transmitters are engineered for versatile use in the process industry, delivering exceptional accuracy with sensor-transmitter matching and robust protection against electromagnetic interference. Configurable via the HART® protocol, these transmitters can be easily set up . Features include open circuit and short circuit , Incorrect wiring, Internal device error, Over range and under range detections. These functions ensure high reliability and system security.

 
TT-Stator Slot RTD Temperature Sensor

TT-Stator Slot RTD Temperature Sensor

Read more
Stator Slot RTD Temperature Sensor is a rectangular, flat, laminated sensor commonly called Stator Slot  because they are inserted between the coils in the stator of a motor.
Key Features:-
  • Available in Pt100, Pt1000, Pt500 and Pt200
  • Accuracy Class A,B as per IEC60751
  • PTFE Insulated wire 22 AWG to 28 AWG
  • 3 wires ,2 wire, 4 wire configuration options.
  • Single & Dual Element
  • Thickness 0.8 mm to 5.00 mm, Length 45.0 mm to 600.0 mm, Width 6.5mm to 30.0 mm.
 
TT-167-Head Mounted USB Temperatrue Transmitter

TT-167-Head Mounted USB Temperatrue Transmitter

Read more
In industries where accuracy is crucial and time is of the essence, the Head Mount Transmitter with -USB proves to be a dependable choice for temperature measurement. This versatile, loop-powered transmitter, designed for head mounting, is compatible with various sensors, providing both flexibility and reliable performance for industrial applications.  
FTOS-SPRING LOADED OIL SEAL NIPPLE
CAD $ 18.00

FTOS-SPRING LOADED OIL SEAL NIPPLE

Add to cart
Spring loaded oil seal fitting: These fittings are used to install thermocouples and RTDs with thermowells, protection tube. Spring loaded A spring-loaded thermocouple fitting is a type of fitting used to ensure consistent contact between the thermocouple probe and the surface being measured, even when there is mechanical movement, thermal expansion, or vibration in the system.